Item
|
ZX2-LDA11
|
ZX2-LDA41
|
Measurement period
|
Min 30 μs
|
Response time
|
60 µs, 120 µs, 240 µs, 500 µs, 1 ms, 2 ms, 4 ms, 8 ms, 12 ms, 20 ms, 36 ms, 66 ms, 128 ms, 250 ms, 500 ms
|
Analog output
|
4 to 20 mA, Max. load resistance: 300Ω, ±5VDC or 1 to 5 VDC, Output impedance: 100Ω
|
Judgement outputs (HIGH/PASS/LOW: 3 outputs), error output
|
NPN open-collector outputs, 30 VDC, 50 mA max.(residual voltage: 1 V max. for load current 10 mA max.,2 V max. for load current above 10 mA)
|
PNP open-collector outputs, 30 VDC, 50 mA max.(residual voltage: 1 V max. for load current 10 mA max., 2 V max. for load current above 10 mA)
|
Laser OFF input, zero reset input, timing input, reset input, bank input
|
ON: Short-circuited with 0-V terminal or 1.5 V or less
OFF: Open (leakage current: 0.1 mA max.)
|
ON: Supply voltage short-circuited or supply voltage within 1.5 V
OFF: Open (leakage current: 0.1 mA max.)
|
Functions
|
Smart tuning, scaling, sample hold, peak hold, bottom hold, peak-to-peak hold, self-peak hold, self-bottom hold, average hold, zero reset, On-delay timer, OFF-delay timer, keep/clamp switch, (A-B)calculations, thickness calculation, mutual interference prevention, laser deterioration detection, bank function (4 banks)
|
Indications
|
Judgement indicators: HIGH (orange), PASS (green), LOW (orange), 11-segment main display (red), 11-segmentsub-display (orange), laser ON (green), zero reset (green), enable (green), menu (green), HIGH threshold (orange), LOW threshold (orange)
|
Power supply voltage
|
10 to 30 VDC, including 10% ripple(p-p)
|
Power consumption
|
3,000 mW max. with power supply voltage of 30 VDC and power supply current of 100 mA (with Sensor connected)
|
Ambient temperature
|
Operating: 0 to 50°C, Storage: -15 to 70°C (with no icing or condensation)
|
Ambient humidity
|
Operating and storage: 35% to 85% (with no condensation)
|
Dielectric strength
|
1,000 VAC, 50/60 Hz for 1 min.
|
Vibration resistance
(destruction)
|
10 to 150 Hz, 0.7-mm double amplitude, 80 min. each in X,Y,and Z directions
|
Shock resistance
(destruction)
|
300 m/s 2 3 times each in six directions (up/down,left/right,forward/backward)
|
Degree of protection
|
IEC60529, IP40P
|
Connection method
|
Prewired (standard cable length: 2 m)
|
Weight (packed state)
|
Approx. 200 g (unit only: Approx.135 g)
|
Materials
|
Case: PBT(polybutylene terephtahalate), Cover: Polycarbonate, Display: Acrylic resin, Button: Polyacetal, Cable: PVC
|
Accessories
|
Instruction sheet
|