Measurement range

50±10 mm

100±35 mm

300±150 mm

600±400 mm

Light source (wave length)

Visible-light semiconductor laser
(wavelength: 660 nm, 1 mW max., IEC/EN Class 2, FDA Class II)

Spot diameter (typical)

(Defined at the measurement center distance)

0.17 mm dia.

0.33 mm dia.

0.52 mm dia.

0.56 mm dia.

Power supply voltage

10 to 30 VDC, including 10% ripple (p-p)

Current consumption

250 mA max. (at power supply voltage 10 VDC)

Control output

Load power supply voltage: 30 VDC max., Load current: 100 mA max.

(Residual voltage: 1 V max. (load current 10 mA or less), 2 V max. (load current of 10 to 100 mA))

Analog output

Current output: 4 to 20 mA, maximum load resistance: 300 Ω

Indicators

Digital display (red), output indicator (OUT1, OUT2) (orange), zero reset indicator (orange), menu indicator (orange), laser ON indicator (green), and smart tuning indicator (blue)

Response time

Judgment output

Super-high-speed (SHS) Mode: 1 ms

High-speed (HS) Mode: 10 ms

Standard (Stnd) Mode: 100 ms

Laser OFF input

200 ms max.

Zero reset input

200 ms max.

Temperature characteristic

0.03% F.S./°C

0.04% F.S./°C

Linearity

±0.15% F.S.

±0.25% F.S.

±0.25% F.S.

(200 to 600 mm)

±0.5% F.S.

(entire range)

Resolution

2 µm

7 µm

30 µm

80 µm

Ambient illumination

Illumination on received light surface:

7,500 lx or less (incandescent light)

Illumination on received light surface:

5,000 lx or less (incandescent light)

Ambient temperature

Operating: -10 to 55°C, Storage: -15 to 70°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% (with no condensation)

Dielectric strength

1,000 VAC, 50/60 Hz, 1 minute3

Vibration resistance (destruction)

10 to 55 Hz, 1.5-mm double amplitude, 2 hours each in X, Y, and Z directions

Shock resistance (destruction)

500 m/s2 3 times each in X, Y, and Z directions

Degree of protection

IEC 60529, IP67

Connection method

Pre-wired model (Standard cable length: 2 m, 5 m)

Pre-wired connector model (Standard cable length: 0.5 m)

Weight

(packed state/

sensor only)

Pre-wired models (2 m)

Approx. 240 g / Approx. 180 g

Approx. 270 g / Approx. 210 g

Pre-wired models (5 m)

Approx. 450 g / Approx. 330 g

Approx. 480 g / Approx. 360 g

Pre-wired connector models (0.5 m)

Approx. 170 g / Approx. 110 g

Approx. 200 g / Approx. 140 g

Materials

Case and cover: PBT (polybutylene terephthalate), Optical window: Glass, Cable: PVC, Mounting hole part: SUS303

Accessories

Instruction sheet and Laser warning label (English)

Pre-wired

2 m

ZX1-LD50A61 2M

ZX1-LD50A81 2M

5 m

ZX1-LD50A61 5M

ZX1-LD50A81 5M

Pre-wired connector

0.5 m

ZX1-LD50A66 0.5M

ZX1-LD50A86 0.5M

Pre-wired

2 m

ZX1-LD100A61 2M

ZX1-LD100A81 2M

5 m

ZX1-LD100A61 5M

ZX1-LD100A81 5M

Pre-wired connector

0.5 m

ZX1-LD100A66 0.5M

ZX1-LD100A86 0.5M

Pre-wired

2 m

ZX1-LD300A61 2M

ZX1-LD300A81 2M

5 m

ZX1-LD300A61 5M

ZX1-LD300A81 5M

Pre-wired connector

0.5 m

ZX1-LD300A66 0.5M

ZX1-LD300A86 0.5M

Pre-wired

2 m

ZX1-LD600A61 2M

ZX1-LD600A81 2M

5 m

ZX1-LD600A61 5M

ZX1-LD600A81 5M

Pre-wired connector

0.5 m

ZX1-LD600A66 0.5M

ZX1-LD600A86 0.5M

10 m

ZX0-XC10R

20 m

ZX0-XC20R