Авторизованный дистрибьютор и
инжиниринговый партнер c 1998 года
инжиниринговый партнер c 1998 года
+7 495 956-64-50 Москва
+7 964 705-09-83 Москва
+7 926 176-78-92 Москва
+7 965 145-74-36 Москва
+7 8442 43-84-28 Волгоград
Автономный контроллер Trajexia TJ2-MC64 и ведущее устройство EtherCAT TJ2-ECT обеспечивают значительное улучшение производительности и точности, что позволяет увеличить скорость работы машин. Обладая управлением по 64 осям с минимальным временем цикла, и с использованием 64 бит целых чисел, контроллеры Trajexia TJ2 обеспечивают более быструю работу при более высокой точности. Для компактного оборудования Omron предлагает контроллер динамического управления Trajexia MC02.
|
Name |
Order code |
|---|---|
|
Trajexia motion controller Unit, up to 64 axes. (Trajexia end cover unit TJ1-TER is included) |
TJ2-MC64 |
|
Trajexia motion controller unit, up to 16 axes. (Trajexia end cover unit TJ1-TER is included) |
TJ1-MC16 |
|
Trajexia motion controller unit, up to 4 axes. (Trajexia end cover unit TJ1-TER is included) |
TJ1-MC04 |
|
Power supply for Trajexia system, 100 to 240 VAC |
CJ1W-PA202 |
|
Power supply for Trajexia system, 24 VDC |
CJ1W-PD022 |
|
Name |
Order code |
|---|---|
|
Trajexia EtherCAT master unit (up to 64 servo drives) |
TJ2-ECT64 |
|
Trajexia EtherCAT master unit (up to 16 servo drives) |
TJ2-ECT16 |
|
Trajexia EtherCAT master unit (up to 4 servo drives) |
TJ2-ECT04 |
|
Trajexia MECHATROLINK-II master unit (up to 16 stations) |
TJ1-ML16 |
|
Trajexia MECHATROLINK-II master unit (up to 4 stations) |
TJ1-ML04 |
|
Trajexia flexible axis unit (for 2 stations) |
TJ1-FL02 |
|
Name |
Order code |
|---|---|
|
Trajexia DeviceNet slave unit |
TJ1-DRT |
|
Trajexia PROFIBUS-DP slave unit |
TJ1-PRT |
|
Trajexia CANopen unit |
TJ1-CORT |
|
Name |
Order code |
|
|---|---|---|
|
Accurax G5 servo drive EtherCAT built-in |
R88D-KN ___ -ECT |
|
|
MX2 inverter with EtherCAT option board |
Frequency inverter |
3G3MX2-A_ |
|
EtherCAT option board |
||
|
3G3AX-MX2-ECT |
||
Note: Refer to servo systems and frequency inverter sections for detailed specs and ordering information
|
Function |
Specification |
Order code |
|---|---|---|
|
SmartSlice Interface unit |
SmartSlice EtherCAT inteface unit |
GRT1-ECT |
|
End plate, one unit required per bus interface |
|
GRT1-END |
|
4 NPN inputs |
24 VDC, 6 mA, 3-wire connection |
GRT1-ID4 |
|
4 PNP inputs |
24 VDC, 6 mA, 3-wire connection |
GRT1-ID4-1 |
|
8 NPN inputs |
24 VDC, 4 mA, 1-wire connection + 4xG |
GRT1-ID8 |
|
8 PNP inputs |
24 VDC, 4 mA, 1-wire connection + 4xV |
GRT1-ID8-1 |
|
4 AC inputs |
110 VAC, 2-wire connection |
GRT1-IA4-1 |
|
4 AC inputs |
230 VAC, 2-wire connection |
GRT1-IA4-2 |
|
4 NPN outputs |
24 VDC, 500 mA, 2-wire connection |
GRT1-OD4 |
|
4 PNP outputs |
24 VDC, 500 mA, 2-wire connection |
GRT1-OD4-1 |
|
4 PNP outputs with short-circuit protection |
24 VDC, 500 mA, 3-wire connection |
GRT1-OD4G-1 |
|
4 PNP outputs with short-circuit protection |
24 VDC, 2 A, 2-wire connection |
GRT1-OD4G-3 |
|
8 NPN outputs |
24 VDC, 500 mA, 1-wire connection + 4xV |
GRT1-OD8 |
|
8 PNP outputs |
24 VDC, 500 mA, 1-wire connection + 4xG |
GRT1-OD8-1 |
|
8 PNP outputs with short-circuit protection |
24 VDC, 500 mA, 1-wire connection + 4xG |
GRT1-OD8G-1 |
|
2 relay outputs |
240 VAC, 2 A, normally-open contacts |
GRT1-ROS2 |
|
2 analog inputs, current/voltage |
±10 V, 0 to 10 V, 0 to 5 V, 1 to 5 V, 0 to 20 mA, 4 to 20 mA |
GRT1-AD2 |
|
2 analog outputs, voltage |
±10 V, 0 to 10 V, 0 to 5 V, 1 to 5 V |
GRT1-DA2V |
|
2 analog outputs, current |
0 to 20 mA, 4 to 20 mA |
GRT1-DA2C |
|
2 Pt100 inputs |
Pt100, 2-wire or 3-wire connection |
GRT1-TS2P |
|
2 Pt1000 inputs |
Pt1000, 2-wire or 3-wire connection |
GRT1-TS2K |
|
2 Thermocouple inputs |
Types B, E, J , K, N, R, S, T, U, W, PL2, with cold junction compensation |
GRT1-TS2T |
Note: Refer to Automation systems catalogue for detailed specs and accesories information
|
Name |
Order code |
|
|---|---|---|
|
16 NPN inputs |
24 VDC, 6 mA, 1-wire connection, expandable |
GX-ID1611 |
|
16 PNP inputs |
24 VDC, 6 mA, 1-wire connection, expandable |
GX-ID1621 |
|
16 NPN outputs |
24 VDC, 500 mA, 1-wire connection, expandable |
GX-OD1611 |
|
16 PNP outputs |
24 VDC, 500 mA, 1-wire connection, expandable |
GX-OD1621 |
|
8 inputs and 8 outputs, NPN |
24 VDC, 6 mA input, 500 mA output, 1-wire connection |
GX-MD1611 |
|
8 inputs and 8 outputs, PNP |
24 VDC, 6 mA input, 500 mA output, 1-wire connection |
GX-MD1621 |
|
16 NPN inputs |
24 VDC, 6 mA, 3-wire connection |
GX-ID1612 |
|
16 PNP inputs |
24 VDC, 6 mA, 3-wire connection |
GX-ID1622 |
|
16 NPN outputs |
24 VDC, 500 mA, 3-wire connection |
GX-OD1612 |
|
16 PNP outputs |
24 VDC, 500 mA, 3-wire connection |
GX-OD1622 |
|
8 inputs and 8 outputs, NPN |
24 VDC, 6 mA input, 500 mA output, 3-wire connection |
GX-MD1612 |
|
8 inputs and 8 outputs, PNP |
24 VDC, 6 mA input, 500 mA output, 3-wire connection |
GX-MD1622 |
|
16 relay outputs |
250 VAC, 2 A,1-wire connection, expandable |
GX-OC1601 |
|
4 analog inputs, current/voltage |
±10 V, 0 to 10 V, 0 to 5 V, 1 to 5 V, 4 to 20 mA |
GX-AD0471 |
|
2 analog outputs, current/voltage |
±10 V, 0 to 10 V, 0 to 5 V, 1 to 5 V, 4 to 20 mA |
GX-DA0271 |
|
2 encoder open collector inputs |
500 kHz Open collector input |
GX-EC0211 |
|
2 encoder line-driver inputs |
4 MHz Line driver input |
GX-EC0241 |
Note: The GX-Series I/O blocks are only supported by the T2-MC64 motion controller and with official firmware release above 2.0132.
|
Name |
Specification |
Order code |
|---|---|---|
|
Vision system with EtherCAT interface |
NPN |
FZM1-350-ECT |
|
PNP |
FZM1-355-ECT |
|
|
Smart camera with EtherCAT interface |
NPN/Color camera |
FQ-MS120-ECT |
|
NPN/Monocrome camera |
FQ-MS120-M-ECT |
|
|
PNP/Color camera |
FQ-MS125-ECT |
|
|
PNP/Monocrome camera |
FQ-MS125-M-ECT |
Note: The vision systems are only supported by the T2-MC64 motion controller and with official firmware release above 2.0132.
|
Name |
Order code |
|
|---|---|---|
|
Accurax G5 servo drive ML-II built-in |
R88D-KN ___ -ML2 |
|
|
G-Series servo drive ML-II built-in |
R88D-GN __ H-ML2 |
|
|
MX2 inverter with MECHATROLINK-II option board |
Frequency inverter |
3G3MX2-A_ |
|
ML2 option board |
3G3AX-MX2-MRT |
|
Note: Refer to servo systems and frequency inverter sections for detailed specs and ordering information
|
Function |
Specification |
Order code |
|---|---|---|
|
SmartSlice Interface unit |
SmartSlice MECHATROLINK-II inteface unit |
GRT1-ML2 |
|
End plate, one unit required per bus interface |
|
GRT1-END |
|
4 NPN inputs |
24 VDC, 6 mA, 3-wire connection |
GRT1-ID4 |
|
4 PNP inputs |
24 VDC, 6 mA, 3-wire connection |
GRT1-ID4-1 |
|
8 NPN inputs |
24 VDC, 4 mA, 1-wire connection + 4xG |
GRT1-ID8 |
|
8 PNP inputs |
24 VDC, 4 mA, 1-wire connection + 4xV |
GRT1-ID8-1 |
|
4 AC inputs |
110 VAC, 2-wire connection |
GRT1-IA4-1 |
|
4 AC inputs |
230 VAC, 2-wire connection |
GRT1-IA4-2 |
|
4 NPN outputs |
24 VDC, 500 mA, 2-wire connection |
GRT1-OD4 |
|
4 PNP outputs |
24 VDC, 500 mA, 2-wire connection |
GRT1-OD4-1 |
|
4 PNP outputs with short-circuit protection |
24 VDC, 500 mA, 3-wire connection |
GRT1-OD4G-1 |
|
4 PNP outputs with short-circuit protection |
24 VDC, 2 A, 2-wire connection |
GRT1-OD4G-3 |
|
8 NPN outputs |
24 VDC, 500 mA, 1-wire connection + 4xV |
GRT1-OD8 |
|
8 PNP outputs |
24 VDC, 500 mA, 1-wire connection + 4xG |
GRT1-OD8-1 |
|
8 PNP outputs with short-circuit protection |
24 VDC, 500 mA, 1-wire connection + 4xG |
GRT1-OD8G-1 |
|
2 relay outputs |
240 VAC, 2 A, normally-open contacts |
GRT1-ROS2 |
|
2 analog inputs, current/voltage |
±10 V, 0 to 10 V, 0 to 5 V, 1 to 5 V, 0 to 20 mA, 4 to 20 mA |
GRT1-AD2 |
|
2 analog outputs, voltage |
±10 V, 0 to 10 V, 0 to 5 V, 1 to 5 V |
GRT1-DA2V |
|
2 analog outputs, current |
0 to 20 mA, 4 to 20 mA |
GRT1-DA2C |
|
2 Pt100 inputs |
Pt100, 2-wire or 3-wire connection |
GRT1-TS2P |
|
2 Pt1000 inputs |
Pt1000, 2-wire or 3-wire connection |
GRT1-TS2K |
|
2 Thermocouple inputs |
Types B, E, J , K, N, R, S, T, U, W, PL2, with cold junction compensation |
GRT1-TS2T |
Note: Refer to Automation systems catalogue for detailed specs and accesories information
|
Name |
Remarks |
Order code |
|---|---|---|
|
MECHATROLINK-II cables |
0.5 meter |
JEPMC-W6003-A5 |
|
1 meter |
JEPMC-W6003-01 |
|
|
3 meters |
JEPMC-W6003-03 |
|
|
5 meters |
JEPMC-W6003-05 |
|
|
10 meters |
JEPMC-W6003-10 |
|
|
20 meters |
JEPMC-W6003-20 |
|
|
30 meters |
JEPMC-W6003-30 |
|
|
MECHATROLINK-II terminator |
Terminating resistor |
JEPMC-W6022 |
|
MECHATROLINK-II repeater |
Network repeater |
JEPMC-REP2000 |
|
Specifications |
Order code |
|---|---|
|
CX-Motion Pro V1.3.3 or higher |
CX-One |
|
Trajexia Studio V1.3.3 or higher |
TJ1-Studio |
|
Symbol |
Specifications |
Order code |
|---|---|---|
|
① |
Power supply unit for Trajexia system (100 to 240 VAC) |
CJ1W-PA202 |
|
Power supply unit for Trajexia system (24 VDC) |
CJ1W-PD025 |
|
Symbol |
Specifications |
Order code |
|---|---|---|
|
② |
Trajexia motion controller unit, up to 64 axes (Trajexia end cover unit TJ1-TER is included) |
TJ2-MC64 |
|
Trajexia motion controller unit, up to 2 axes (Trajexia end cover unit TJ1-TER is included) |
TJ2-MC02 |
|
Symbol |
Specifications |
Order code |
|---|---|---|
|
③ |
G5 interface unit |
TJ2-KS02 |
|
Symbol |
Specifications |
Order code |
|---|---|---|
|
④ |
Trajexia DeviceNet slave unit |
TJ1-DRT |
|
Trajexia PROFIBUS-DP slave unit |
TJ1-PRT |
|
|
Trajexia CANopen unit |
TJ1-CORT |
Note: The TJ2-MC02 supports a maximum of one TJ1-CORT unit.
The TJ2-MC02 supports a maximum of one TJ1-PRT or TJ1-DRT unit. No both at the same time.
|
Symbol |
Specifications |
Order code |
|
|---|---|---|---|
|
⑤ |
Interface cable |
1 m |
TJ2-KC01M |
|
3 m |
TJ2-KC03M |
||
|
Symbol |
Specifications |
Order code |
|---|---|---|
|
⑥ |
Accurax G5 Analog/pulse servo drive (100 W to 15 kW) |
R88D-KT_ |
|
Specifications |
Order code |
|---|---|
|
CX-Motion Pro (version 1.4.2 or higher) |
CX-One |
|
Trajexia Studio (version 1.4.2 or higher) |
TJ1-Studio |
Инструмент Trajexia Studio создает простую, интуитивно-понятную программную среду, позволяя выполнять программирование и отладку ваших приложений с помощью расширенного набора инструментов, который позволит сэкономить ваше время. ПО поддерживает существующие устройства, новую версию ПЛК и будущие разработки.
CX-One - это объединенный комплект программного обеспечения с единым лицензионным номером. Установив однажды CX-One, пользователь сможет создавать, конфигурировать и программировать множество различных устройств, таких как ПЛК, ЧМИ или системы многоосного управления перемещениями, а также сети. CX-One значительно упрощает работу инженера и сводит к минимуму необходимость обучения программированию или конфигурированию систем автоматизации.
Склад Omron Москва - 0 шт.
Склад Omron Европа - 0 шт.
Склад Траскон (возможен самовывоз) - 3 шт.
Склад Траскон (возможен самовывоз) - 0 шт.
Склад Omron Москва - 8 шт.
Склад Omron Европа - 0 шт.
Склад Траскон (возможен самовывоз) - 0 шт.
Склад Omron Москва - 1 шт.
Склад Omron Европа - 0 шт.
Склад Траскон (возможен самовывоз) - 2 шт.
Склад Omron Москва - 34 шт.
Склад Omron Европа - 167 шт.
Склад Траскон (возможен самовывоз) - 0 шт.
Склад Omron Москва - 9 шт.
Склад Omron Европа - 0 шт.
Склад Траскон (возможен самовывоз) - 0 шт.
Склад Omron Москва - 3 шт.
Склад Omron Европа - 0 шт.
Склад Траскон (возможен самовывоз) - 0 шт.
Склад Omron Москва - 15 шт.
Склад Omron Европа - 0 шт.
Склад Траскон (возможен самовывоз) - 2 шт.
Склад Omron Москва - 20 шт.
Склад Omron Европа - 36 шт.
Склад Траскон (возможен самовывоз) - 2 шт.
Склад Omron Москва - 0 шт.
Склад Omron Европа - 0 шт.
Склад Траскон (возможен самовывоз) - 0 шт.
Склад Omron Москва - 9 шт.
Склад Omron Европа - 77 шт.
